Anatomy Of An Earthquake
Seismologists examine the parts of an earthquake, such as what happens to the Earth’s surface during an earthquake, how the energy of an earthquake moves from inside the Earth to the surface, how this energy causes damage, and the slip of the fault that causes the earthquake. Faults are cracks in Earth’s crust where rocks on either side of the crack have moved. By studying the different parts and actions of earthquakes, seismologists learn more about their effects and how to predict and prepare for their ground shaking in order to reduce damage.
A Focus and Epicenter
The point within the Earth along the rupturing geological fault where an earthquake originates is called the focus, or hypocenter. The point on the Earth’s surface directly above the focus is called the epicenter. Earthquake waves begin to radiate out from the focus and subsequently form along the fault rupture. If the focus is near the surface—between 0 and 70 km (0 and 40 mi) deep—shallow-focus earthquakes are produced. If it is intermediate or deep below the crust—between 70 and 700 km (40 and 400 mi) deep—a deep-focus earthquake will be produced. Shallow-focus earthquakes tend to be larger, and therefore more damaging, earthquakes. This is because they are closer to the surface where the rocks are stronger and build up more strain.
Seismologists know from observations that most earthquakes originate as shallow-focus earthquakes and most of them occur near plate boundaries—areas where the Earth’s crustal plates move against each other (see Plate Tectonics). Other earthquakes, including deep-focus earthquakes, can originate in subduction zones, where one tectonic plate subducts, or moves under another plate. See also Geology; Earth.
B Faults
Stress in the Earth’s crust creates faults, resulting in earthquakes. The properties of an earthquake depend strongly on the type of fault slip, or movement along the fault, that causes the earthquake. Geologists categorize faults according to the direction of the fault slip. The surface between the two sides of a fault lies in a plane, and the direction of the plane is usually not vertical; rather it dips at an angle into the Earth. When the rock hanging over the dipping fault plane slips downward into the ground, the fault is called a normal fault. When the hanging wall slips upward in relation to the footwall, the fault is called a reverse fault. Both normal and reverse faults produce vertical displacements, or the upward movement of one side of the fault above the other side, that appear at the surface as fault scarps. Strike-slip faults are another type of fault that produce horizontal displacements, or the side by side sliding movement of the fault, such as seen along the San Andreas fault in California. Strike-slip faults are usually found along boundaries between two plates that are sliding past each other.
C Waves
The sudden movement of rocks along a fault causes vibrations that transmit energy through the Earth in the form of waves. Waves that travel in the rocks below the surface of the Earth are called body waves, and there are two types of body waves: primary, or P, waves, and secondary, or S, waves. The S waves, also known as shearing waves, move the ground back and forth.
Earthquakes also contain surface waves that travel out from the epicenter along the surface of the Earth. Two types of these surface waves occur: Rayleigh waves, named after British physicist Lord Rayleigh, and Love waves, named after British geophysicist A. E. H. Love. Surface waves also cause damage to structures, as they shake the ground underneath the foundations of buildings and other structures.
Body waves, or P and S waves, radiate out from the rupturing fault starting at the focus of the earthquake. P waves are compression waves because the rocky material in their path moves back and forth in the same direction as the wave travels alternately compressing and expanding the rock. P waves are the fastest seismic waves; they travel in strong rock at about 6 to 7 km (about 4 mi) per second. P waves are followed by S waves, which shear, or twist, rather than compress the rock they travel through. S waves travel at about 3.5 km (about 2 mi) per second. S waves cause rocky material to move either side to side or up and down perpendicular to the direction the waves are traveling, thus shearing the rocks. Both P and S waves help seismologists to locate the focus and epicenter of an earthquake. As P and S waves move through the interior of the Earth, they are reflected and refracted, or bent, just as light waves are reflected and bent by glass. Seismologists examine this bending to determine where the earthquake originated.
On the surface of the Earth, Rayleigh waves cause rock particles to move forward, up, backward, and down in a path that contains the direction of the wave travel. This circular movement is somewhat like a piece of seaweed caught in an ocean wave, rolling in a circular path onto a beach. The second type of surface wave, the Love wave, causes rock to move horizontally, or side to side at right angles to the direction of the traveling wave, with no vertical displacements. Rayleigh and Love waves always travel slower than P waves and usually travel slower than S waves.
0 Comments